Physics of the atmosphere: the International Standard Atmosphere
Why a standard atmosphere
Air pressure, temperature and density change with height, season and weather. Aircraft and engine performance depends on all three, so performance data, altimeter calibration and engine ratings refer to an agreed model: the International Standard Atmosphere (ISA), defined by ICAO. Dry air is about 78 % nitrogen and 21 % oxygen by volume, with argon, carbon dioxide and other gases making up the rest.
ISA values
| Quantity | Mean sea level |
|---|---|
| Temperature | 15 °C (288.15 K) |
| Pressure | 1013.25 hPa (29.92 inHg) |
| Density | 1.225 kg/m³ |
| Temperature lapse rate | 6.5 °C per km (about 2 °C per 1000 ft) up to 11 km |
| Tropopause | 11 km (36 089 ft), −56.5 °C, constant above up to 20 km |
Pressure falls with height because there is less air above; density falls with both pressure and temperature, following the equation of state p = ρRT.
Pressure and density altitude
Pressure altitude is the height in the ISA at which the measured pressure would occur; it is what an altimeter shows when set to 1013.25 hPa. Density altitude is the height in the ISA at which the actual air density would occur. On a hot day, at a high airfield or in humid air the density is lower than standard, the density altitude is higher, and engine power, propeller efficiency and wing lift are all reduced.
- ISA mean sea level: 15 °C, 1013.25 hPa, 1.225 kg/m³.
- Temperature falls by 6.5 °C per km up to the tropopause at 11 km.
- High, hot and humid conditions lower air density and degrade performance.
- Commission Implementing Regulation (EU) 2023/989, Annex III (Part-66), Appendix I, Module 8.1.
- ICAO, Manual of the ICAO Standard Atmosphere, Doc 7488, 3rd ed., 1993.
- FAA, Pilot’s Handbook of Aeronautical Knowledge, FAA-H-8083-25C, 2023, ch. 4.