Aircraft structures formula sheet

LibraryMAE-ST-01 · Rev. 1 · November 2026

Aircraft structures formula sheet

Stress analysis relations for beams, shafts, thin-walled sections and pressure vessels

Stress, strain and elasticity

QuantityRelationNotes
Direct stressσ = F / A
Direct strainε = ΔL / Ldimensionless
Hooke’s lawσ = E ε ; τ = G γlinear elastic range
Poisson’s ratioν = − εlateral / εaxialabout 0.33 for aluminium alloys
Shear modulusG = E / [2 (1 + ν)]isotropic material
Average shear stressτ = V / Ae.g. single-shear rivet or bolt
Thermal strainεT = α ΔTα: coefficient of thermal expansion

Bending of beams

QuantityRelationNotes
Bending stressσ = M y / Iy from the neutral axis
Section modulusZ = I / ymax ; σmax = M / Z
Rectangle b × hI = b h³ / 12about the centroidal axis parallel to b
Solid circle, diameter dI = π d⁴ / 64
Tube, D outer, d innerI = π (D⁴ − d⁴) / 64
Parallel-axis theoremI = Ic + A d²d: distance between the axes
Cantilever, end load Pδ = P L³ / (3 E I)tip deflection
Cantilever, uniform load wδ = w L⁴ / (8 E I)tip deflection
Simply supported, central loadδ = P L³ / (48 E I)mid-span deflection
Simply supported, uniform loadδ = 5 w L⁴ / (384 E I)mid-span deflection

Torsion

QuantityRelationNotes
Shear stress in a circular shaftτ = T r / J
Polar second momentJ = π d⁴ / 32 (solid) ; π (D⁴ − d⁴) / 32 (tube)
Angle of twistθ = T L / (G J)radians
Thin-walled closed section (Bredt–Batho)q = T / (2 A) ; τ = T / (2 A t)A: area enclosed by the wall mid-line

Thin-walled pressure vessels

QuantityRelationNotes
Cylinder, hoop stressσh = p r / ttwice the longitudinal stress
Cylinder, longitudinal stressσl = p r / (2t)
Sphereσ = p r / (2t)pressurised fuselage cabins sit between these cases

Buckling, fatigue and design margins

QuantityRelationNotes
Euler buckling loadPcr = π² E I / (K L)²K = 1 pinned–pinned, 2 fixed–free, 0.5 fixed–fixed, ≈0.7 fixed–pinned
Cyclic loadingσm = (σmax + σmin)/2 ; σa = (σmax − σmin)/2stress ratio R = σmin / σmax
Ultimate loadultimate = 1.5 × limit loadfactor of safety prescribed in CS / 14 CFR 25.303
Margin of safetyMS = allowable / (applied × FS) − 1MS ≥ 0 required

Sources

  1. Megson, T. H. G., Aircraft Structures for Engineering Students, 7th ed., Butterworth-Heinemann, 2021.
  2. Hibbeler, R. C., Mechanics of Materials, Pearson.
  3. EASA, Certification Specifications for Large Aeroplanes (CS-25), CS 25.303 Factor of safety; 14 CFR §25.303.
  4. Federal Aviation Administration, Aviation Maintenance Technician Handbook — Airframe, FAA-H-8083-31B, 2023.

Study material only. Not approved maintenance or operational data; always use the current approved documentation.

Mr Aircraft Engineer — open aviation and aerospace education.Study material only; not approved maintenance data.About · Contact · Privacy · Terms