Aerodynamics formula sheet

LibraryMAE-AE-01 · Rev. 1 · November 2026

Aerodynamics formula sheet

Relations used in subsonic aerodynamics, aerofoil and wing theory and basic performance

Air as a working fluid

QuantityRelationNotes
Equation of state (perfect gas)p = ρ R TR = 287.05 J kg−1 K−1 for dry air
Dynamic pressureq = ½ ρ V²Pa; the scale for every force coefficient
Speed of sounda = √(γ R T)γ = 1.4 for air; depends on temperature only
Mach numberM = V / aM < 0.3: density changes usually negligible
Reynolds numberRe = ρ V c / μ = V c / νc: reference length, usually the chord
Density ratio and EASσ = ρ / ρ₀ ; EAS = TAS √σρ₀ = 1.225 kg m−3 (ISA sea level)

Incompressible flow

QuantityRelationNotes
Continuity (one-dimensional)A₁ V₁ = A₂ V₂steady flow, constant density
Bernoullip + ½ ρ V² = p₀ = constantalong a streamline; steady, inviscid, incompressible
Pressure coefficientCp = (p − p∞) / q∞Cp = 1 at a stagnation point
Cp from local velocityCp = 1 − (V / V∞)²incompressible flow only
Kutta–Joukowski theoremL′ = ρ∞ V∞ Γlift per unit span from circulation Γ

Forces and coefficients

QuantityRelationNotes
LiftL = ½ ρ V² S CLS: reference (wing) area
DragD = ½ ρ V² S CD
Pitching momentM = ½ ρ V² S cMAC CMcMAC: mean aerodynamic chord
Section coefficientscl = L′/(q c), cd = D′/(q c)lower case: per unit span (two-dimensional)

Aerofoils: thin-aerofoil theory

QuantityRelationNotes
Lift coefficientcl = 2π (α − αL=0)α in radians; thin aerofoil, small angles
Lift-curve slopea₀ = dcl/dα = 2π rad−1 ≈ 0.11 deg−1measured slopes are slightly lower
Aerodynamic centrexac = c/4CM,ac independent of α
Symmetric aerofoilαL=0 = 0, CM,c/4 = 0centre of pressure fixed at c/4

Finite wings

QuantityRelationNotes
Aspect ratioAR = b² / Sb: span
Induced drag coefficientCD,i = CL² / (π e AR)e = 1 for an elliptic lift distribution
Induced angle (elliptic)αi = CL / (π AR)radians
Finite-wing lift slopea = a₀ / (1 + a₀ / (π e₁ AR))a₀ per radian; e₁: span efficiency factor
Drag polarCD = CD,0 + K CL², K = 1/(π e AR)e: Oswald efficiency factor
Maximum lift-to-drag ratio(L/D)max = 1 / (2 √(CD,0 K))reached where CD,i = CD,0

Compressible flow

QuantityRelationNotes
Stagnation temperatureT₀ / T = 1 + ½(γ − 1) M²adiabatic flow
Stagnation pressurep₀ / p = [1 + ½(γ − 1) M²]γ/(γ−1)isentropic flow
Prandtl–Glauert ruleCp = Cp,0 / √(1 − M∞²)subsonic, thin bodies, small disturbances
Mach angleμ = arcsin(1 / M)supersonic flow only

Performance

QuantityRelationNotes
Steady level flightL = W, T = D
Stall speedVS = √(2W / (ρ S CL,max))use true airspeed with actual ρ
Load factor in a level turnn = L / W = 1 / cos φφ: bank angle
Stall speed in a turnVS,turn = VS √n
Turn radius and rateR = V² / (g tan φ), ω = g tan φ / Vlevel, co-ordinated turn
Rate of climbRC = (T V − D V) / Wexcess power divided by weight

Sources

  1. Anderson, J. D., Fundamentals of Aerodynamics, 6th ed., McGraw-Hill Education, 2017.
  2. Anderson, J. D., Introduction to Flight, 8th ed., McGraw-Hill Education, 2016.
  3. Federal Aviation Administration, Pilot’s Handbook of Aeronautical Knowledge, FAA-H-8083-25C, 2023.
  4. International Civil Aviation Organization, Manual of the ICAO Standard Atmosphere, Doc 7488/3, 1993.

Study material only. Not approved maintenance or operational data; always use the current approved documentation.

Mr Aircraft Engineer — open aviation and aerospace education.Study material only; not approved maintenance data.About · Contact · Privacy · Terms