Gas Turbine Engines

Home / Courses / Gas Turbine

Gas Turbine Engines

How a gas turbine turns fuel into thrust and shaft power: the cycle, every module along the gas path and the systems that keep an engine running, taught on the F110 turbofan and the T53 turboshaft.

16 weeksAssociate degreeTheory and workshopF110 · T53
LIVE MODEL
Learning outcomes

By the end of the course

01

Explain the Brayton cycle and how thrust and shaft power are produced.

02

Identify each engine module along the gas path and describe its function.

03

Trace the lubrication, fuel, ignition, starting and bleed air systems on a real engine.

04

Apply inspection practice: borescope, FOD control and condition monitoring.

Syllabus

Week by week

Open a week to see its topics and the reference used for them.

WEEK 01Introduction to gas turbine engines+
  • Development of the jet engine and the main engine types: turbojet, turbofan, turboprop and turboshaft.
  • Where the F110 (afterburning turbofan) and the T53 (free-turbine turboshaft) sit in this family.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 02Working principles and the Brayton cycle+
  • Newton’s second and third laws applied to thrust; gross thrust, net thrust and the effect of bypass ratio.
  • Compression, combustion, expansion and exhaust as one continuous cycle; engine station numbering.
Reference: Rolls-Royce plc, The Jet Engine, 5th ed., Rolls-Royce, 2005.
WEEK 03Air inlets+
  • Subsonic and supersonic inlet designs, inlet pressure recovery and distortion.
  • Inlet inspection, FOD screens and anti-icing on the inlet lip.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 04Compressors+
  • Centrifugal and axial compressors: stages, rotor and stator rows, pressure ratio.
  • Compressor stall and surge, variable stator vanes and bleed valves as surge protection.
Reference: Rolls-Royce plc, The Jet Engine, 5th ed., Rolls-Royce, 2005.
WEEK 05Combustion section+
  • Annular, can-annular and reverse-flow combustors; primary and dilution air zones.
  • Fuel nozzles, flame stabilisation and combustor liner inspection.
Reference: Rolls-Royce plc, The Jet Engine, 5th ed., Rolls-Royce, 2005.
WEEK 06Turbine, exhaust and afterburner+
  • Impulse and reaction turbine stages, blade cooling and turbine inlet temperature limits.
  • Exhaust nozzles, the T53 free power turbine and the F110 afterburner with variable nozzle.
Reference: H.I.H. Saravanamuttoo, G.F.C. Rogers, H. Cohen, P.V. Straznicky, A.C. Nix, Gas Turbine Theory, 7th ed., Pearson, 2017.
WEEK 07Practical examination+
  • Workshop examination on the engine: locate, show and explain the modules covered in weeks 1–6.
WEEK 08Theory examination+
  • Written examination covering weeks 1–6.
WEEK 09Lubrication systems+
  • Pressure, scavenge and breather subsystems; oil tank, pumps, filters and coolers.
  • Bearing sumps and seals, chip detectors and oil analysis.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 10Fuel systems and engine control+
  • Fuel pumps, fuel control units, flow dividers and nozzles.
  • Hydromechanical control and full-authority digital engine control (FADEC).
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 11Ignition and starting systems+
  • High-energy capacitor ignition units, igniter plugs and safety precautions.
  • Electric starters, starter-generators and air turbine starters; start sequence and abnormal starts.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 12Accessory drives and bleed air+
  • Accessory gearboxes and power take-off shafts.
  • Compressor bleed air for anti-icing, cooling and aircraft services.
Reference: Rolls-Royce plc, The Jet Engine, 5th ed., Rolls-Royce, 2005.
WEEK 13Engine indicating and monitoring+
  • EGT/ITT, rotor speed, torque, oil pressure and temperature indication.
  • Vibration monitoring and engine condition trend monitoring.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 14Inspection and maintenance practice+
  • Borescope inspection, FOD and blade damage limits.
  • Engine run-up, troubleshooting with technical documentation and maintenance records.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 15Practical examination+
  • Workshop examination on the F110 and T53: show and explain systems covered in weeks 9–14.
WEEK 16Theory examination+
  • Written examination covering weeks 9–14.
Video lessons

Watch the lessons

COMING SOON
ENGINE SERIEST53 and F110 systems
References

Sources

[1] FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
[2] Rolls-Royce plc, The Jet Engine, 5th ed., Rolls-Royce, 2005.
[3] H.I.H. Saravanamuttoo, G.F.C. Rogers, H. Cohen, P.V. Straznicky, A.C. Nix, Gas Turbine Theory, 7th ed., Pearson, 2017.
[4] J.D. Mattingly, Elements of Propulsion: Gas Turbines and Rockets, 2nd ed., AIAA, 2006.