LibraryMAE-PP-01 · Rev. 1 · November 2026
Piston engines and propellers
Cycle efficiency, engine power, operation, propeller coefficients and efficiency
Piston engine cycles
| Quantity | Relation | Notes |
|---|---|---|
| Otto cycle efficiency | η = 1 − 1/rγ−1 | r = 8, γ = 1.4 gives η = 0.565 |
| Diesel cycle efficiency | η = 1 − [1/rγ−1] [(rcγ − 1)/(γ(rc − 1))] | rc: cut-off ratio |
| Compression ratio | r = (Vd + Vc)/Vc | limited by detonation in spark-ignition engines |
| Brake power | Pb = 2π N T | N: rev/s, T: torque |
| Mean effective pressure | P = pme Vd N / nR | nR = 2 for four-stroke |
| Mechanical efficiency | ηm = Pb/Pi = bmep/imep | |
| Brake specific fuel consumption | bsfc = ṁf/Pb | |
| Stoichiometric air–fuel ratio | about 14.7 : 1 for gasoline | best power slightly rich, best economy lean |
| Altitude effect, normally aspirated | P/P₀ ≈ ρ/ρ₀ | turbo- or supercharging restores manifold pressure |
Piston engine operation
| Topic | Description | Notes |
|---|---|---|
| Four-stroke sequence | intake, compression, power, exhaust | two crankshaft revolutions per cycle |
| Valve timing | intake opens before TDC (lead), exhaust closes after TDC (lag) | both open together: valve overlap |
| Ignition | dual magnetos and two plugs per cylinder | independent of the electrical system |
| Detonation | explosive combustion of end gas after normal ignition | high temperature, lean mixture, low-grade fuel |
| Pre-ignition | charge ignited before the spark by a hot spot | |
| Carburettor icing | fuel evaporation and venturi pressure drop cool the intake | possible well above 0 °C in humid air |
| Indications | manifold pressure, rpm, EGT, CHT, oil pressure and temperature, fuel flow |
Propellers
| Quantity | Relation | Notes |
|---|---|---|
| Advance ratio | J = V/(nD) | n: rev/s, D: diameter |
| Thrust and power coefficients | CT = T/(ρn²D⁴) ; CP = P/(ρn³D⁵) | |
| Propeller efficiency | ηp = T V / P = J CT/CP | |
| Ideal (Froude) efficiency | ηi = 2 / [1 + √(1 + T/(½ρV²A))] | upper bound from momentum theory |
| Geometric pitch | p = 2πr tan β | β: blade angle at radius r |
| Blade angle of attack | α = β − φ ; tan φ = V/(2πnr) | φ: helix (inflow) angle |
| Helical tip Mach number | Mtip = √[(πnD)² + V²]/a | kept below about 0.85–0.9 |
| Pitch types | fixed, ground-adjustable, controllable, constant-speed (governor), feathering, reversing |
Sources
- Heywood, J. B., Internal Combustion Engine Fundamentals, 2nd ed., McGraw-Hill, 2018.
- McCormick, B. W., Aerodynamics, Aeronautics, and Flight Mechanics, 2nd ed., Wiley, 1995 (propellers).
- FAA, Aviation Maintenance Technician Handbook — Powerplant, FAA-H-8083-32B, 2023.
- FAA, Pilot’s Handbook of Aeronautical Knowledge, FAA-H-8083-25C, 2023, Chapter 7.
Study material only. Not approved maintenance or operational data; always use the current approved documentation.