LibraryMAE-RC-01 · Rev. 1 · November 2026
Rotorcraft aerodynamics and dynamics
Momentum and blade element theory, forward flight, rotor dynamics and control
Rotor definitions
| Quantity | Relation | Notes |
|---|---|---|
| Disc area and disc loading | A = πR² ; DL = T/A | |
| Solidity | σ = Nb c / (πR) | blade area over disc area |
| Tip speed | Vtip = ΩR | typically about 200–220 m/s |
| Thrust and power coefficients | CT = T / [ρA(ΩR)²] ; CP = P / [ρA(ΩR)³] | CQ = CP for torque |
| Advance ratio | μ = V cos α / (ΩR) | forward speed over tip speed |
| Inflow ratio | λ = (V sin α + vi) / (ΩR) |
Momentum theory
| Quantity | Relation | Notes |
|---|---|---|
| Hover induced velocity | vh = √[T / (2ρA)] | far wake velocity is 2vh |
| Ideal hover power | Pideal = T vh = T3/2 / √(2ρA) | lower disc loading, less power |
| Figure of merit | FM = Pideal / Pactual | about 0.7–0.8 for a good rotor |
| Axial climb | vi/vh = −Vc/(2vh) + √[(Vc/2vh)² + 1] | valid for climb; not valid in vortex ring state |
| Forward flight (Glauert) | vi = T / [2ρA √(V² + vi²)] | at high speed vi ≈ T/(2ρAV) |
| Ground effect (Cheeseman–Bennett) | TIGE/TOGE = 1 / [1 − (R/4z)²] | same power; z: rotor height above ground |
Blade element results
| Quantity | Relation | Notes |
|---|---|---|
| Thrust, linear twist, uniform inflow | CT = (σa/2)(θ0.75/3 − λ/2) | a: lift-curve slope, θ0.75: pitch at 75 % radius |
| Blade loading | CT/σ | stall margin indicator, about 0.08–0.12 |
| Hover power | CP = κ CT3/2/√2 + σ Cd0/8 | induced + profile; κ ≈ 1.15 |
| Advancing tip Mach number | Madv = (ΩR + V)/a | compressibility limit on top speed |
| Reverse-flow region | circle of diameter μR on the retreating side | retreating blade stall limits forward speed |
Rotor dynamics and control
| Topic | Description | Notes |
|---|---|---|
| Dissymmetry of lift | advancing blade sees ΩR + V, retreating blade ΩR − V | balanced by blade flapping |
| Flapping and disc tilt | flap-back with speed; cyclic tilts the tip-path plane | thrust vector follows the disc |
| Lock number | γ = ρ a c R⁴ / Ib | aerodynamic over inertial blade forces |
| Lead–lag | Coriolis forces from flapping drive in-plane motion | lag dampers in articulated rotors |
| Ground resonance | coupling of lag modes with the fuselage on its landing gear | mechanical instability on the ground |
| Collective, cyclic, pedals | collective: thrust; cyclic: disc tilt; pedals: tail-rotor thrust | tail rotor balances main-rotor torque |
| Autorotation | upward flow through the rotor drives it with no engine power | freewheel unit disengages the engine |
| Vortex ring state | rotor descends into its own wake | roughly at descent rates near the hover induced velocity, at low forward speed |
Sources
- Leishman, J. G., Principles of Helicopter Aerodynamics, 2nd ed., Cambridge University Press, 2006.
- Johnson, W., Rotorcraft Aeromechanics, Cambridge University Press, 2013.
- Cheeseman, I. C. and Bennett, W. E., “The effect of the ground on a helicopter rotor in forward flight”, ARC R&M 3021, 1955.
- FAA, Helicopter Flying Handbook, FAA-H-8083-21B, 2019.
Study material only. Not approved maintenance or operational data; always use the current approved documentation.