Piston Engines
Aircraft reciprocating engines from the four-stroke cycle to induction, ignition, lubrication and cooling, explained with 3D cutaways of horizontally opposed and radial engines.
Video seriesEnglish3D cutawaysShort lessons
LIVE MODEL
Learning outcomes
By the end of the course
01
Explain the four-stroke Otto cycle and the slider-crank mechanism.
02
Identify cylinders, pistons, crankshafts, valves and the valve train.
03
Describe carburettor and fuel injection systems, magneto ignition, lubrication and cooling.
04
Relate power, efficiency and manifold pressure to engine operation.
Syllabus
Week by week
Open a week to see its topics and the reference used for them.
WEEK 01The four-stroke cycle+
- Intake, compression, power and exhaust strokes; valve timing.
- Compression ratio and the ideal Otto cycle.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 02Engine configurations+
- In-line, V, horizontally opposed and radial engines.
- Firing order and engine balance.
Reference: M.J. Kroes, T.W. Wild, Aircraft Powerplants, 8th ed., McGraw-Hill, 2013.
WEEK 03Crankcase, crankshaft and connecting rods+
- Crankshaft throws, counterweights and dynamic dampers.
- Connecting rod types and bearings.
Reference: M.J. Kroes, T.W. Wild, Aircraft Powerplants, 8th ed., McGraw-Hill, 2013.
WEEK 04Cylinders and pistons+
- Cylinder barrels, heads and cooling fins.
- Pistons, rings and wrist pins.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 05Valves and the valve train+
- Intake and exhaust valves, springs, camshafts, lifters and rockers.
- Valve clearance and its effect on timing.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 06Induction systems and carburettors+
- Float-type carburettor operation and mixture control.
- Carburettor icing and induction air heat.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 07Fuel injection+
- Continuous-flow injection systems and fuel metering.
- Comparison with carburetion.
Reference: M.J. Kroes, T.W. Wild, Aircraft Powerplants, 8th ed., McGraw-Hill, 2013.
WEEK 08Ignition systems+
- Magneto principles, dual ignition and spark plugs.
- Ignition timing and magneto checks.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 09Lubrication+
- Wet-sump and dry-sump systems; oil pumps, filters and coolers.
- Oil analysis and oil consumption.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 10Cooling and exhaust+
- Air cooling, baffles, cowl flaps and cylinder head temperature.
- Exhaust systems and inspection for cracks.
Reference: M.J. Kroes, T.W. Wild, Aircraft Powerplants, 8th ed., McGraw-Hill, 2013.
WEEK 11Supercharging and turbocharging+
- Manifold pressure and altitude performance.
- Turbocharger controls and wastegates.
Reference: FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
WEEK 12Engine operation and power+
- Indicated, brake and friction horsepower; specific fuel consumption.
- Run-up, mixture leaning and troubleshooting basics.
Reference: M.J. Kroes, T.W. Wild, Aircraft Powerplants, 8th ed., McGraw-Hill, 2013.
Video lessons
Watch the lessons
COMING SOON
PISTON ENGINESThe four-stroke cycle and beyond
References
Sources
[1] FAA-H-8083-32B, Aviation Maintenance Technician Handbook – Powerplant, Vol. 1, FAA, 2023.
[2] M.J. Kroes, T.W. Wild, Aircraft Powerplants, 8th ed., McGraw-Hill, 2013.