LibraryMAE-TH-01 · Rev. 1 · November 2026 Thermodynamics and heat transfer
Gas properties, the first and second laws, cycles and heat-transfer modes
Properties of gases
| Quantity | Relation | Notes |
|---|
| Perfect gas | p v = R T ; p = ρ R T | R = R̄/Mm, R̄ = 8.314 J mol−1 K−1 |
| Specific heats | cp − cv = R ; γ = cp/cv | |
| Specific heat from γ | cp = γR/(γ − 1) ; cv = R/(γ − 1) | air: cp ≈ 1005 J kg⁻¹ K⁻¹ |
| Enthalpy and internal energy | h = cp T ; u = cv T | perfect gas, constant specific heats |
| Stagnation temperature | T₀ = T + V²/(2cp) | |
First and second laws
| Quantity | Relation | Notes |
|---|
| Closed system | Q − W = ΔU | |
| Steady-flow energy equation | q − w = Δh + Δ(V²/2) + g Δz | per unit mass flow |
| Entropy change (perfect gas) | Δs = cp ln(T₂/T₁) − R ln(p₂/p₁) | |
| Clausius inequality | ∮ δQ/T ≤ 0 | equality for reversible cycles |
Processes and cycles
| Quantity | Relation | Notes |
|---|
| Isothermal work | W = p₁V₁ ln(V₂/V₁) | |
| Isentropic process | p vγ = const ; T₂/T₁ = (p₂/p₁)(γ−1)/γ | |
| Polytropic process | p vⁿ = const ; W = (p₁V₁ − p₂V₂)/(n − 1) | |
| Carnot efficiency | η = 1 − TL/TH | upper limit for any heat engine |
| Otto cycle | η = 1 − 1/rγ−1 | r: compression ratio |
| Brayton cycle | η = 1 − 1/rp(γ−1)/γ | rp: pressure ratio |
Heat transfer
| Quantity | Relation | Notes |
|---|
| Conduction (Fourier) | q = −k A dT/dx | |
| Thermal resistance | R = L/(kA) (wall) ; R = 1/(hA) (surface) | resistances in series add |
| Convection (Newton) | Q = h A (Ts − T∞) | |
| Radiation | Q = ε σ A (Ts⁴ − Tsur⁴) | σ = 5.670 × 10⁻⁸ W m⁻² K⁻⁴ |
| Nusselt and Prandtl numbers | Nu = hL/k ; Pr = cpμ/k | air: Pr ≈ 0.71 |
Sources
- Çengel, Y. A. and Boles, M. A., Thermodynamics: An Engineering Approach, 9th ed., McGraw-Hill, 2019.
- Bergman, T. L., Lavine, A. S., Incropera, F. P. and DeWitt, D. P., Fundamentals of Heat and Mass Transfer, 7th ed., Wiley, 2011.
- Rogers, G. F. C. and Mayhew, Y. R., Engineering Thermodynamics: Work and Heat Transfer, 4th ed., Longman, 1992.
Study material only. Not approved maintenance or operational data; always use the current approved documentation.