LibraryMAE-PR-01 · Rev. 1 · November 2026
Gas turbine formula sheet
Thrust, efficiencies, component relations and corrected parameters
Thrust
| Quantity | Relation | Notes |
|---|---|---|
| Net thrust, single stream | F = ṁ (Vj − V₀) + Aj (pj − p₀) | fuel mass flow neglected; second term only when the nozzle is choked |
| Gross thrust and ram drag | FG = ṁ Vj + Aj(pj − p₀) ; Dram = ṁ V₀ | F = FG − Dram |
| Separate-jet turbofan | F = ṁh(Vjh − V₀) + ṁc(Vjc − V₀) | h: core (hot), c: bypass (cold), unchoked nozzles |
| Bypass ratio | BPR = ṁc / ṁh | |
| Specific thrust | F / ṁ | N s kg−1; falls as bypass ratio rises |
| Thrust specific fuel consumption | TSFC = ṁf / F | kg N−1 h−1 or lb lbf−1 h−1 |
| Fuel–air ratio | f = ṁf / ṁa |
Efficiencies
| Quantity | Relation | Notes |
|---|---|---|
| Propulsive efficiency | ηp = 2 / (1 + Vj / V₀) | Froude efficiency, pj = p₀ |
| Thermal efficiency | ηth = Δ(½ṁV²) / (ṁf QR) | QR: fuel heating value (kerosene ≈ 43 MJ kg−1) |
| Overall efficiency | η₀ = ηp ηth = F V₀ / (ṁf QR) | |
| Ideal Brayton cycle | η = 1 − 1 / r(γ−1)/γ | r: overall pressure ratio |
Components (stagnation quantities)
| Quantity | Relation | Notes |
|---|---|---|
| Isentropic temperature ratio | T₀₂ / T₀₁ = (p₀₂ / p₀₁)(γ−1)/γ | |
| Compressor work | wc = cp (T₀₃ − T₀₂) | per unit mass of air |
| Compressor isentropic efficiency | ηc = (T₀₃′ − T₀₂) / (T₀₃ − T₀₂) | ′: isentropic end state |
| Turbine isentropic efficiency | ηt = (T₀₄ − T₀₅) / (T₀₄ − T₀₅′) | |
| Shaft work balance | cpa ΔT₀c = ηm cpg ΔT₀t | ηm: mechanical efficiency |
| Shaft power | P = τ ω = 2π N τ / 60 | N in rev min−1 |
| Choking pressure ratio | p₀ / p* = ((γ + 1)/2)γ/(γ−1) | 1.893 for γ = 1.4; 1.852 for γ = 4/3 |
Non-dimensional (corrected) parameters
| Quantity | Relation | Notes |
|---|---|---|
| Temperature and pressure ratios | θ = T₀ / 288.15 K ; δ = p₀ / 101.325 kPa | measured at engine inlet |
| Corrected speed | N / √θ | compares engines at different ambient conditions |
| Corrected mass flow | ṁ √θ / δ | |
| Corrected thrust and fuel flow | F / δ ; ṁf / (δ √θ) |
Typical gas properties
| Quantity | Relation | Notes |
|---|---|---|
| Air (compression) | cpa = 1.005 kJ kg−1 K−1, γa = 1.40 | |
| Combustion gas (expansion) | cpg = 1.148 kJ kg−1 K−1, γg = 1.333 | mean values used for cycle estimates |
Sources
- Saravanamuttoo, H. I. H., Rogers, G. F. C., Cohen, H., Straznicky, P. V. and Nix, A. C., Gas Turbine Theory, 7th ed., Pearson, 2017.
- Hill, P. G. and Peterson, C. R., Mechanics and Thermodynamics of Propulsion, 2nd ed., Addison-Wesley, 1992.
- Rolls-Royce plc, The Jet Engine, 5th ed., Rolls-Royce, 1996.
- Federal Aviation Administration, Aviation Maintenance Technician Handbook — Powerplant, FAA-H-8083-32B, 2023.
Study material only. Not approved maintenance or operational data; always use the current approved documentation.