Engineering mechanics and dynamics

LibraryMAE-PH-01 · Rev. 1 · November 2026

Engineering mechanics and dynamics

Statics, particle and rigid-body dynamics, rotation and vibration

Statics

QuantityRelationNotes
EquilibriumΣF = 0 ; ΣM = 0in each direction and about any point
Moment of a forceM = r × F ; |M| = F dd: perpendicular distance
Dry frictionF ≤ μs N ; F = μk N when sliding
Centroidx̄ = Σ xiAi / ΣAicentre of gravity with weights

Kinematics and kinetics of a particle

QuantityRelationNotes
Constant accelerationv = u + a t ; s = u t + ½ a t² ; v² = u² + 2 a s
Newton’s second lawF = m a = dp/dtp = m v
Impulse–momentum∫F dt = Δp
Work and energyW = ∫F · ds ; KE = ½ m v² ; PE = m g h
PowerP = F · v
Circular motionv = ω r ; an = v²/r = ω² rcentripetal acceleration

Rigid-body rotation

QuantityRelationNotes
Equation of motionτ = I αabout a fixed axis or the centre of mass
Rotational speedω = 2π N / 60N in rev/min, ω in rad/s
Rotational energy and powerKE = ½ I ω² ; P = τ ω
Angular momentumH = I ω
Gyroscopic precessionΩp = τ / (I ω)rotor spin ω, applied torque τ
Parallel-axis theoremI = IG + m d²
Slender rod, length LI = mL²/12 (centre) ; mL²/3 (end)
Solid cylinder / thin ringI = ½ m r² ; I = m r²about the axis of symmetry
Solid sphereI = ⅖ m r²

Vibration

QuantityRelationNotes
Undamped natural frequencyωₙ = √(k/m) ; fₙ = ωₙ / 2π
Simple pendulumT = 2π √(L/g)small amplitudes
Logarithmic decrementδ = ln(x₁/x₂) ≈ 2πζlight damping, successive peaks
Forced response at resonanceX/Xstatic = 1/(2ζ)excitation at ωₙ

Sources

  1. Hibbeler, R. C., Engineering Mechanics: Statics and Dynamics, 14th ed., Pearson, 2016.
  2. Ling, S. J., Sanny, J. and Moebs, W., University Physics, Volume 1, OpenStax, Rice University, 2016.
  3. Rao, S. S., Mechanical Vibrations, 6th ed., Pearson, 2017.

Study material only. Not approved maintenance or operational data; always use the current approved documentation.

Mr Aircraft Engineer — open aviation and aerospace education.Study material only; not approved maintenance data.About · Contact · Privacy · Terms